FRONT BRAKE (for Hatchback) > REASSEMBLY



1. TEMPORARILY TIGHTEN FRONT DISC BRAKE BLEEDER PLUG


2. INSTALL FRONT DISC BRAKE BLEEDER PLUG CAP


3. INSTALL PISTON SEAL


    C187983E09

  1. Apply a light layer of lithium soap base glycol grease to the entire circumference of a new piston seal as shown in the illustration.

    Text in Illustration 
    *1
    		Lithium Soap Base Glycol Grease

  1. Install the piston seal onto the disc brake cylinder.

    NOTICE:
    Securely install the piston seal into the groove of the disc brake cylinder.


4. INSTALL FRONT DISC BRAKE PISTON


    C201642E02

  1. Apply a light layer of lithium soap base glycol grease to the entire circumference of a new cylinder boot as shown in the illustration.

    Text in Illustration 
    *1
    		Lithium Soap Base Glycol Grease
    *2
    		Disc Brake Piston
    *3
    		Cylinder Boot

  1. Apply a light layer of lithium soap base glycol grease to the entire circumference of the disc brake piston as shown in the illustration.

  1. Install the cylinder boot to the disc brake piston.

  1. Install the disc brake piston to the disc brake cylinder.

    NOTICE:
    Do not install the piston forcibly in the disc brake cylinder.


5. INSTALL CYLINDER BOOT


    C108937E02

  1. Install the cylinder boot into the disc brake cylinder.

    Text in Illustration 
    *1
    		Set Ring
    *2
    		Cylinder Boot

    NOTICE:
    Securely install the cylinder boot into the groove of the disc brake cylinder.

  1. Using a screwdriver, install a new set ring.

    NOTICE:
    1. Securely install the set ring into the groove of the cylinder boot.
    2. Do not damage the cylinder boot.