ENGINE IMMOBILISER SYSTEM (for Hatchback) > DTC CHECK / CLEAR |
- HINT:
- If the ignition switch cannot be turned to ON, communication with the Techstream can be performed by connecting the Techstream to the vehicle and turning a courtesy light switch on and off at intervals of 1.5 seconds or less until communication between the Techstream and vehicle begins.
- Refer to the Techstream operator's manual for further details.
| CHECK FOR TRANSPONDER KEY ECU ASSEMBLY DTC |
Connect the Techstream to the DLC3.
Turn the ignition switch to ON.
Turn the Techstream on.
Enter the following menus: Body Electrical / Immobiliser / Trouble Codes.
Check for DTCs.
| CHECK FOR ECM DTC |
Connect the Techstream to the DLC3.
Turn the ignition switch to ON.
Turn the Techstream on.
Enter the following menus: Powertrain / Engine and ECT / Trouble Codes.
Check for DTCs.
| CLEAR TRANSPONDER KEY ECU ASSEMBLY DTC |
Connect the Techstream to the DLC3.
Turn the ignition switch to ON.
Turn the Techstream on.
Enter the following menus: Body Electrical / Immobiliser / Trouble Codes.
Clear the DTCs.
| CLEAR ECM DTC |
Connect the Techstream to the DLC3.
Turn the ignition switch to ON.
Turn the Techstream on.
Enter the following menus: Powertrain / Engine and ECT / Trouble Codes.
Clear the DTCs.