AIR CONDITIONING UNIT (for Hatchback) > DISASSEMBLY |
1. REMOVE DEFROSTER DAMPER CONTROL CABLE SUB-ASSEMBLY |
Using a screwdriver with its tip wrapped in protective tape, disengage the 3 claws and remove the defroster damper control cable.
Text in Illustration *1 Protective Tape
2. REMOVE AIR MIX DAMPER CONTROL CABLE SUB-ASSEMBLY |
Remove the plate.
Using a screwdriver with its tip wrapped in protective tape, disengage the 3 claws and remove the air mix damper control cable.
Text in Illustration *1 Protective Tape
3. REMOVE PTC HEATER ASSEMBLY (for Cold Area Specification Vehicles) |
Disengage the clamp.
Remove the 2 screws and the PTC heater.
4. REMOVE HEATER RADIATOR UNIT SUB-ASSEMBLY |
Disengage the 3 claws and remove the clamp.
Remove the heater radiator unit from the air conditioner radiator.
5. REMOVE COOLER EXPANSION VALVE |
Using a 4 mm hexagon wrench, remove the 2 hexagon bolts and detach the cooler expansion valve.
Remove the 2 O-rings from the cooler evaporator.
6. REMOVE DRAIN COOLER HOSE |
Remove the drain cooler hose.
7. REMOVE NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY |
Disengage the clamp and remove the connector from the lower heater case.
Remove the 3 screws.
Disengage the 4 claws and remove the lower heater case.
Remove the cooler evaporator with the cooler thermistor.
8. REMOVE NO. 1 COOLER THERMISTOR |
Remove the front evaporator temperature sensor (No. 1 cooler thermistor).