Check the angle of inclination required to lock the retractor.

1. Gently incline the retractor from its initial position. Check that the belt does not lock when the retractor is inclined 15° or less in any direction. Also, check that the belt locks when the inclination of the retractor is 45° or more.
   

   NOTICE:

   Do not disassemble the retractor.

   If the operation is not as specified, replace the rear center seat outer belt.
   

Insert the hook into the body hole and install the retractor with the bolt.

for Fixed Seat Type:

1. Install the anchor plate with the bolt.
   

   Torque:

   42 N*m{ 430 kgf*cm , 31 ft.*lbf }

   NOTICE:

   1. Install the anchor plate with the arrow mark facing forward.
      
   2. Do not place the anchor plate over the locating mark area of the floor panel.
      

Check that the ELR locks.

NOTICE:

1. The check should be performed with the rear seat outer belt installed.
   
2. Do not allow the anchor part of the rear seat outer belt and the protruding parts of the floor panel to overlap.
   

1. With the belt installed, check that the belt locks when it is pulled out quickly.
   If the operation is not as specified, replace the rear center seat outer belt.
   

Engage the 5 claws and install the package tray trim.

Install the 4 clips.

Connect the connector.

Engage the 4 claws and install the high mounted stop light assembly.

Engage the 4 clips and the claw and install the roof side inner garnish.

Engage the 2 clips and the 4 claws and install the rear seat side cover.

Align the location mark with the paint mark first, and install the rear door opening trim weatherstrip, as shown in the illustration.

Paint mark:

Area	Color
RH side	Green
LH side	Red

Engage the 7 claws and install the rear door scuff plate.

w/ Grand Spare Tire:
Install the luggage compartment trim inner pad.

w/o Grand Spare Tire:
Install the luggage compartment trim inner pad.

Install the spare wheel cover.

Install the luggage compartment floor mat.

Insert the 2 hooks into the rear seatback frame hole and install the rear seatback, tightening the 2 bolts in the sequence shown in the illustration.

Torque:

37 N*m{ 375 kgf*cm , 27 ft.*lbf }

Install the rear seatback cover with the 2 clips.

Pull up the rear seatback.

Install the rear seat outer belt into the rear seat shoulder belt guide.

Install the rear center seat outer belt into the rear center seat shoulder belt guide.

Insert the 2 hooks into the rear seatback frame hole and install the rear seatback, tightening the 2 bolts in the sequence shown in the illustration.

Torque:

37 N*m{ 375 kgf*cm , 27 ft.*lbf }

Install the rear seatback cover with the 2 clips.

Pull up the rear seatback.

Install the rear seat outer belt into the rear seat shoulder belt guide.

Engage the 3 hooks and install the rear seatback.

Tighten the 3 bolts.

Torque:

7.9 N*m{ 80 kgf*cm , 70 in.*lbf }

Install the rear seat outer belt into the rear seat shoulder belt guide.

HINT:

Use the same procedure for both sides.

Install the rear center seat outer belt into the rear center seat shoulder belt guide.

for 60/40 Split Seat Type:

1. Install the rear seat cushion cover pad (Click here).
   

for Fixed Seat Type:

1. Install the rear seat cushion cover pad (Click here).