COMPRESSOR (for Hatchback) > REMOVAL



1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM
  1. Start up the engine.

  1. A/C switch on.

  1. Turn the blower switch to on.

  1. Operate the cooler compressor with an engine speed of approximately 1000 rpm for 5 to 6 minutes to circulate the refrigerant and collect the remaining compressor oil from each component, in the cooler compressor.

  1. Stop the engine.



    I106567E01
  1. Remove the caps from the service valves on the refrigerant line.

    Text in Illustration 
    *1
    High Pressure Service Valve
    *2
    Low Pressure Service Valve
  1. Connect the refrigerant recovery unit.

  1. Recover the refrigerant from the air conditioning system using a refrigerant recovery unit.

    HINT:
    Use the refrigerant recovery unit in accordance with the manufacturer's instruction manual.


2. REMOVE FAN AND GENERATOR V BELT
(Click here)


3. REMOVE ENGINE UNDER COVER RH


4. DISCONNECT SUCTION HOSE SUB-ASSEMBLY


    I106593
  1. Remove the bolt and disconnect the suction hose from the compressor.

  1. Remove the O-ring from the suction hose.

    NOTICE:
    Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.


5. DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE


    I106594
  1. Remove the bolt and disconnect the discharge hose from the compressor.

  1. Remove the O-ring from the discharge hose.

    NOTICE:
    Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.


6. REMOVE COMPRESSOR WITH PULLEY ASSEMBLY
  1. Disconnect the connector.



    I105997
  1. Remove the 4 bolts and the compressor.