STEERING WHEEL (for Hatchback) > INSPECTION



1. INSPECT STEERING PAD SWITCH


  1. Inspect the pad switch.



    1. Measure the resistance according to the value(s) in the table below.


      C233656E05


      Text in Illustration 
      *1
      Terminal B
      -
      -
      *a
      Component without harness connected
      (Steering Pad Switch Assembly)
      -
      -

      Standard Resistance: 
      Tester Connection
      Switch Condition
      Specified Condition
      V12-1 (HO) - Terminal B
      Always
      Below 2.5 Ω
      V12-10 (AU1) - V12-8 (EAU)
      No switch pushed
      95 to 105 kΩ
      V12-9 (AU2) - V12-8 (EAU)
      No switch pushed
      95 to 105 kΩ
      V12-10 (AU1) - V12-8 (EAU)
      Volume+ switch: pushed
      950 to 1050 Ω
      V12-9 (AU2) - V12-8 (EAU)
      Volume+ switch: pushed
      95 to 105 kΩ
      V12-10 (AU1) - V12-8 (EAU)
      Volume- switch: pushed
      2955 to 3265 Ω
      V12-9 (AU2) - V12-8 (EAU)
      Volume- switch: pushed
      95 to 105 kΩ
      V12-10 (AU1) - V12-8 (EAU)
      Seek+ switch: pushed
      Below 2.5 Ω
      V12-9 (AU2) - V12-8 (EAU)
      Seek+ switch: pushed
      95 to 105 kΩ
      V12-10 (AU1) - V12-8 (EAU)
      Seek- switch: pushed
      313 to 345 Ω
      V12-9 (AU2) - V12-8 (EAU)
      Seek- switch: pushed
      95 to 105 kΩ
      V12-10 (AU1) - V12-8 (EAU)
      Mode switch: pushed
      95 to 105 kΩ
      V12-9 (AU2) - V12-8 (EAU)
      Mode switch: pushed
      Below 2.5 Ω
      If the result is not as specified, replace the steering pad switch assembly.